Products

According to EN 115, the ribs of escalator steps and moving walk pallets must comply with requirements for minimal dimensions. This is in the interests of safety for users of escalators and moving walks. 

Various practical factors, such as stones trapped between comb plates, can cause damage to the step flutes, so that they no longer meet the dimensional requirements. Damage will be detected during the periodic inspection of the escalator or moving walk, and this must be rectified before the installation can be approved under EN115.

Expensive solutions:

Until now, step repair have either made use of welding techniques if possible, or an entire step must be replaced. Both these solutions are expensive, and / or labour-intensive, harmful to the environment and require an undesirable shut-down of the installation.

ANTI-SLIP TREATMENT FOR MORE SAFETY There is an increased risk of slipping for people using escalators and moving walks. To reduce this risk Mulder Montage has developed the ultimate anti-slip treatment.

Applying the anti-slip treatment can be done in the factory but also on location. This has as an advantage as there is;

• No need to disassemble the steps
• No transport costs
• No shut-down time
• Quick and easy

Recommended applications for the anti-slip treatment on escalators and moving walks;

• Located indoors close to exit doors (environmental conditions)
• Located in car parks (wet conditions)
• Outdoor escalator or moving walk (even when covered)

Other applications:

• Pit cover of escalator or moving walks
• Lift cabin floor
• Entrances lifts
• Surfaces with high risk of slipping

An additional safety guard to help eliminate riding/surfing the handrails. Can be mounted on any make/model of escalator or travolator.

Complies with NEN-EN 115 standards:

• EN115-1:2008+A1:2010 clauses 5.5.2.2 / enclosure table A 2.7
• EN115-2:2010 clauses 5.5.2.3 / 5.13.1.6